Profienergy Profile For Profinet - Siemens SINAMICS G120 Operating Instructions Manual

7.5

PROFIenergy profile for PROFINET

The non-proprietary PROFIenergy profile provides the following functions:
● switches off plant or plant sections in non-operational periods
● monitors the energy flow
● signals the plant or system state
PROFIenergy functions of the inverter
The higher-level control transfers commands to the inverter acyclically. The following
commands and queries are available for the control:
Control commands
● Start_Pause
● End_Pause
Status queries
● PEM_Status
● Query_Measurement
Basic settings in the inverter
Parameter p5611 defines the responses to the PROFIenergy command "Start_Pause".
Enabling PROFIenergy
For "Start_Pause", the drive initiates OFF1
Transition into the energy-saving mode from S4
Converter with the CU250S-2 Control Unit (vector)
Operating Instructions, 06/2013, FW V4.6, A5E31759476B AB
Signal for the start and duration of a pause
Signal for the return into the productive state
Actual device status: Energy-saving mode or productive state
Energy usage
Configuring the fieldbus
7.5 PROFIenergy profile for PROFINET
p5611.0 = 0 Yes
p5611.0 = 1
p5611.1= 0
p5611.1= 1 Yes
p5611.2 = 0
p5611.2 = 1 Yes
No
No
No
141