Adapt terminal strip
This chapter describes how you adapt the function of individual inputs and outputs of the
inverter.
If you adapt the function of an input or output, you overwrite the settings made during the
basic commissioning.
See also the following chapter:
● Basic commissioning with STARTER (Page 85)
● Selecting the pre-assignment for the terminal strip (Page 60)
● Interconnecting signals in the inverter (Page 430)
Figure 6-1
Converter with the CU250S-2 Control Unit (vector)
Operating Instructions, 06/2013, FW V4.6, A5E31759476B AB
Internal interconnection of the inputs and outputs
6
95