Supported Objects - Siemens SINAMICS G120 Operating Instructions Manual

7.6.5

Supported objects

EtherNet/IP objects supported by the G120
Object class
hex
1 hex
4 hex
6 hex
28 hex
29 hex
2A hex
32C hex
32D hex
90 hex
91 hex
F5 hex
F6 hex
401 hex ... 43E he 1025 ... 10
x
1) these objects are part of the EtherNet/IP system management.
ODVA AC/DC assembly
Number required/
optional
hex dec
14 hex 20 Required
15 hex 21 Optional
16 hex 22 Optional
17 hex 23 Optional
18 hex 24 Optional
19 hex 25 Optional
46 hex 70 Required
47 hex 71 Optional
48 hex 72 Optional
49 hex 73 Optional
4A hex 74 Optional
4B hex 75 Optional
Converter with the CU250S-2 Control Unit (vector)
Operating Instructions, 06/2013, FW V4.6, A5E31759476B AB
Object name
dec
1 Identity object
4 Assembly object
6 Connection Manager object
30 Motor Data Object
31 Supervisor Object
42 Drive Object
44 Siemens Drive Object
45 Siemens Motor Data Object
144 Parameter object
145 Parameter object free access (DS47)
245 TCP/IP Interface object
246 Ethernet Link object 1)
Parameter object
86
Type
Sending
Sending
Sending
Sending
Sending
Sending
Receiving
Receiving
Receiving
Receiving
Receiving
Receiving
1)
Name
Basic Speed Control Output
Extended Speed Control Output
Speed and Torque Control Output
Extended Speed and Torque Control Output
Process Control Output
Extended Process Control Output
Basic Speed Control Input
Extended Speed Control Input
Speed and Torque Control Input
Extended Speed and Torque Control Input
Process Control Input
Extended Process Control Input
Configuring the fieldbus
7.6 Communication via EtherNet/IP
Objects ODVA objects
required
x
x
x
x
x
x
x
x
SINAMICS
objects
x
x
x
x
x
147