Ad(A)-R/Ad(A)-2R Unit (Ancillary Device Adapter) - NEC Electra Elite IPK II System Hardware Manual

Document Revision 3
___________________________________________________________________________________
3.2
___________________________________________________________________________________
9 - 6

AD(A)-R/AD(A)-2R Unit (Ancillary Device Adapter)

This Ancillary Device Adapter, shown on
allows connection of a tape recorder to all Multiline Terminals except the
DTR-2DT-1. The AD(A)-2R is used with ITH-8D/16D-2 Multiline Terminals.
Figure 9-7 Connecting a Multiline Terminal to a Recording Device using an
AD(A)-R Unit (Example)
ESI(8)-U( ) ETU and to the recording device.
ESI
ETU
Line Cord
(2-line)
Figure 9-7 Connecting a Multiline Terminal to a Recording Device using
an AD(A)-R Unit (Example)
When installing the AD(A)-R Unit, connect the cables to the AD(A)-R Unit, set
the dip switches, and then install the AD(A)-R Unit on the Multiline Terminal.
Installing Electra Elite IPK II Optional Terminal Equipment
Figure 9-6 AD(A)-R/AD(A)-2R
Figure 9-6 AD(A)-R/AD(A)-2R Unit
illustrates how the AD(A)-R Unit is connected to the
Multiline Terminal + AD(A)-R Unit
Electra Elite IPK II
Unit,
Recording
Device
Mini-Plug Mini-Plug
Connection Cord