Mazda RX-8 Workshop Manual page 3285

< Previous Next >
2011 - RX-8 - Body and Accessories
CONFIRMATION STEP 2: AUDIO CONTROL SWITCH CONFIRMATION [AUDIO]
Make sure the customer complain and identify either the audio control switch malfunction
or audio unit malfunction.
STEP
1 Is the symptom related to either the
audio control switch or the audio
panel operation?
2 Disconnect the audio unit connector
(24-pin).
Inspect both the audio unit and
wiring harness-side connectors for
poor connection. (such as
damaged/pulled-out pins, corrosion).
Are all the pins normal?
INSPECTION
Terminal 1N (audio
control switch1)
Terminal 1P (audio
control switch2)
YesMake sure the customer complain and then
go to the appropriate symptom
troubleshooting procedure.
The symptom is related
No
to the audio panel
operation:
Follow the "Confirmation
Step 1".
The symptom is related
to the audio control
switch operation:
Go to the next step.
YesGo to the next step.
If the audio unit side
No
connector is wrong:
Replace the audio unit.
(See CENTER PANEL UNIT
REMOVAL/INSTALLATION.)
(See CENTER PANEL UNIT
DISASSEMBLY/ASSEMBLY.)
If the wiring harness-
side connector is
wrong:
ACTION