Configuring The User Interfaces For Ssh Clients; Configuring The Ssh Management Functions; Configuring The Ssh Server To Be Compatible With Ssh1 Clients; Configuring Key Pairs - H3C S5600 Series Operation Manual

Preparation
Version
Key
Authentication
Authorization
Data exchange
The SSH server needs to cooperate with an SSH client to complete the interactions between them. For
SSH client configuration, refer to

Configuring the User Interfaces for SSH Clients

An SSH client will access the device through a terminal "VTY" user interface. Therefore, you need to
configure the device user interface to accept SSH clients and allow SSH login. Note that the
configuration takes effect at the next login.
Follow these steps to configure the device user interface for SSH clients:
To do...
Enter system view
Enter user interface view of one or
more user interfaces
Task
Configuring the User Interfaces for SSH
Clients
Configuring the SSH Management
Functions
Configuring the SSH Server to Be
Compatible with SSH1 Clients

Configuring Key Pairs

Creating an SSH User and Specifying an
Authentication Type
Specifying a Service Type for an SSH User
on the Server
Configuring the Public Key of a Client on
the Server
Assigning a Public Key to an SSH User
Exporting the Host Public Key to a File
Configuring the SSH
Use the command...
system-view
user-interface vty first-number
[ last-number ]
Required
Optional
Optional
This task determines which SSH versions
the server should support.
By default, the SSH server is compatible
with SSH1 clients.
Required
Required
Optional
By default, an SSH user can use the
service type of stelnet.
Not necessary when the authentication
mode is password.
Required when the authentication
mode is publickey.
Not necessary when the authentication
mode is password.
Required when the authentication
mode is publickey.
Optional
If a client does not support first-time
authentication, you need to export the
server's public key and configure the key
on the client.
Client.
1-6
Remarks
Remarks
—
—