Display Ntp-Service Status - H3C S5830V2 Series Command Reference Manual

Field
sync distance
Precision
version
source interface
Reftime
Orgtime
Rcvtime
Xmttime
Filter order
Reference clock status
Total sessions

display ntp-service status

Use the display ntp-service status command to display the NTP service status information.
Syntax
display ntp-service status
View
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the NTP service status after time synchronization.
<Sysname> display ntp-service status
Clock status: synchronized
Clock stratum: 2
System peer: LOCAL(0)
Local mode: client
Reference clock ID: 127.127.1.0
Leap indicator: 00
Clock jitter: 0.000977 s
Stability: 0.000 pps
Description
Synchronization distance relative to the upper-level clock, in
seconds, and calculated from dispersion and roundtrip delay
values.
Accuracy of the system clock
NTP version, in the range of 1 to 4.
Source interface.
If the source interface is not specified, this field is Not specified.
Reference timestamp in the NTP message
Originate timestamp in the NTP message
Receive timestamp in the NTP message
Transmit timestamp in the NTP message
Sample information order
Status of the local clock. The field is displayed only when you use
the ntp-service refclock-master command to set the local clock as a
reference clock.
When the reach field of the local clock is 255, the field is displayed
as working normally. Otherwise, the field is displayed as working
abnormally.
Total number of associations
40