Set/Define Server Nameserver; Set/Define Server Password Limit - Lantronix SCS Reference Manual

Command Reference

12.8.21 Set/Define Server Nameserver

⎧ ⎫
SET
⎨ ⎬
SERVER SECONDARY NAMESERVER IPaddress
⎩ ⎭
DEFINE
Specifies the IP address of the name server (if any) for TCP/IP connections. This host will attempt to resolve
text hostnames into numeric form if the local host table is unable to do so.
Restrictions
Parameters
Examples
See Also

12.8.22 Set/Define Server Password Limit

⎧ ⎫
SET
⎨ ⎬
SERVER PASSWORD LIMIT
⎩ ⎭
DEFINE
Limits the number of failures allowed when issuing the Set Privileged command, when entering the login
password when logging in to a serial port, or when Set/Define Ports Password Incoming is enabled. After
limit retries, the port will be logged out. The value is also used for determining the number of times a user
can fail an authenticated user login (e.g., local database, Radius, Secure ID) when Set/Define Ports
Authenticate is enabled.
The user can abort the password process by typing Ctrl-Z instead of the password.
Restrictions
Parameters
Requires privileged user status.
IPaddress
The network address of the nameserving host, in numeric IP format.
Local>> SET SERVER NAMESERVER 192.0.1.49
Set/Define IP Host Limit, page 12-38; Set/Define IP Nameserver, page 12-39;
Configuring the Domain Name Service (DNS), page 6-7
⎧
limit
⎨
⎩
NONE
Requires privileged user status.
This limit does not apply to SSH connections, which always have a password
limit of 3.
limit
A value between 0 and 100. If zero is specified, the port is never logged out for
too many password failures.
None
Sets the password limit to the default value.
12-122
⎫
⎬
⎭
Server Commands