Set/Define Server Host Limit; Set/Define Server Inactivity - Lantronix SCS Reference Manual

Command Reference

12.8.14 Set/Define Server Host Limit

⎧ ⎫
SET
⎨ ⎬
SERVER HOST LIMIT
⎩ ⎭
DEFINE
Sets the maximum number of TCP/IP hosts learned from Rwho that the server will keep information for.
Hosts from the preset host table are exempt from this limit. If the new limit is less than the current limit and
the host table is full, the limit will be slowly weeded down to the new value.
Restrictions
Parameters
Defaults
Examples

12.8.15 Set/Define Server Inactivity

⎧ ⎫
SET
⎨ ⎬
SERVER INACTIVITY TIMER limit
⎩ ⎭
DEFINE
Sets the period of time after which a port with Inactivity Logout enabled is considered inactive and is
automatically logged out.
Restrictions
Parameters
Defaults
⎧ ⎫
limit
⎨ ⎬
⎩ ⎭
NONE
Requires privileged user status.
limit
A value between 0 and 200.
None
No limit is set.
200 hosts
Local>> SET SERVER HOST LIMIT 6
Requires privileged user status.
limit
Enter an inactivity period of 1 to 120 minutes.
30 minutes
12-118
Server Commands