Serial Breaks; Alternate Break Sequences - Lantronix SCS Reference Manual

Console Server Features Managing the Attached Devices

3.6.4.1 Serial Breaks

Break conditions originating from serial connections are controlled on a per port basis. Break conditions
originating from incoming Telnet and SSH connections are based on the settings for port 0, the network
(template) port.
To define where the break condition will be processed, use the Set/Define Ports Break [ local | Remote ]
command for each serial port and port 0.
The default break sequence for port 0 is <Ctrl+Y>. There is no default break sequence for the serial ports.

3.6.4.2 Alternate Break Sequences

You can specify an alternate break (AltBreak) character for use with terminals that cannot natively generate
a break condition and for Telnet or SSH clients that cannot generate break IAC sequences. The syntax for
specifying an AltBreak sequence is Set/Define Ports Break[ <char> | None ], where <char> is a single
character enclosed in quotes. You can specify non-printable characters using the notation \xx, where xx is
the hexadecimal representation for the desired character. The Show/Monitor/List Ports command displays
the current setting.
3-10