Ip/Network Commands; Clear/Purge Hosts; Clear/Purge Ip Factory; Clear/Purge Ip Nat Table - Lantronix SCS Reference Manual

Command Reference

12.5 IP/Network Commands

12.5.1 Clear/Purge Hosts

⎧ ⎫
CLEAR
⎨ ⎬
TELNET HOSTS
⎩ ⎭
PURGE
Removes a TCP/IP host entry from the SCS table of known hosts. If Clear is used and the host was seen
through the rwho facility, it will reappear as soon as that machine broadcasts again. A host will also
reappear if a user Connects to it.
Restrictions
Errors
Parameters
Examples
See Also

12.5.2 Clear/Purge IP Factory

⎧ ⎫
CLEAR
⎨ ⎬
IP FACTORY
⎩ ⎭
PURGE
Resets IP router options to their factory defaults.
Restrictions

12.5.3 Clear/Purge IP NAT Table

⎧ ⎫
CLEAR
⎨ ⎬
IP NAT Table
⎩ ⎭
PURGE
Clears entire NAT table.
Restrictions
⎧ ⎫
ALL
⎨ ⎬
⎩ ⎭
username
Requires privileged user status.
Clear Telnet Hosts will fail if there are any active Telnet connections on the
server.
All
Removes the names of all known hosts.
HostName
The name of a Telnet host to be removed.
Local>> CLEAR HOSTS alex
Set/Define Hosts, page 12-34; Show/Monitor/List Hosts, page 12-48
Requires privileged user status.
Requires privileged user status.
12-18
IP/Network Commands