Lantronix SCS Reference Manual page 235

Command Reference
Errors
Parameters
Defaults
Examples
See Also
12.5.12.11 Set 80211 Reset
SET 80211 RESET
Resets the SCS so any configuration changes will take effect immediately.
Restrictions
Parameters
See Also
If you enter a region that will not work with your 802.11 card, an error bit will
be displayed when you enter the Show 80211 command.
Regions
IC: Canada
ETSI: Europe, most countries (verify with your local regulatory body)
SPAIN: Spain
FRANCE: France
MKK: Japan
FCC
Local>> DEFINE 80211 REGION FRANCE
Local>> SET 80211 RESET
Show 80211, page 12-48; 802.11 Configuration, page 2-11
Requires privileged user status.
Only applies to the SCS200.
Reset
Resets the SCS to make all 802.11 changes take effect immediately. This
command should be entered anytime you make an 802.11 configuration
change. It also clears out any previous errors and starts over with the current
802.11 parameters.
Show 80211, page 12-48; 802.11 Configuration, page 2-11
12-31
IP/Network Commands