Navigation/Help Commands; Apropos; Backwards; Broadcast - Lantronix SCS Reference Manual

Command Reference

12.11 Navigation/Help Commands

12.11.1 Apropos

APROPOS keyword
Displays commands containing the specified keyword. If a command containing the keyword cannot be
found, the SCS will display "nothing appropriate."
The SCS will not display all relevant commands. If there are any logout commands, such as Set Ports and
Define Ports, only one will be shown (in this case, Set Ports).
Restrictions
Parameters
Examples
See Also

12.11.2 Backwards

BACKWARDS
Switches sessions from the current session to the most recently started previous session. If there is only one
active session, it resumes. Repeating the command will cycle you "backward" through the active sessions.
If you search the beginning of the session list, entering this command returns you to the most recent session.
See Also

12.11.3 Broadcast

⎧
⎪
⎨
BROADCAST
PORTS PortNum
⎪
⎩
username
Sends a message to another port, all ports, or a specific user on the server. Broadcast may only be used if
broadcasts have been enabled on the server using the Set/Define Server Broadcast command.
Privileged commands containing the specified keyword will only be displayed
if you are currently the privileged user.
keyword
An alphanumeric string. You do not have to type the complete command
keyword in order to get a response; partial strings will yield appropriate
commands that contain that string.
APROPOS SITE
Help, page 12-187
Forwards, page 12-186; Show/Monitor Sessions, page 12-98; Port-Specific
Session Configuration, page 8-4
⎫
ALL
⎪
⎬
message
⎪
⎭
12-180
Navigation/Help Commands