Set/Define Menu - Lantronix SCS Reference Manual

Command Reference
Show/Monitor/List Server will display the time remaining before a scheduled
Note:
initialization.
Examples
See Also

12.8.3 Set/Define Menu

⎧ ⎫
SET
⎨ ⎬
MENU
⎩ ⎭
DEFINE
Configures individual Menu Mode menu choices and the menu's title banner. You can also configure the
menus using a preconfigured text file, which is specified using the filename parameter and is normally saved
on the flash disk .
When using a configuration file, use the Set Menu command to parse the file before using Define to commit
the file into use.
You should add a menu entry that allows users to log out. This can be
Note:
accomplished by adding a "Logout Port Port" command to the end of the menu.
Restrictions
Errors
Delay
Schedules the initialization to take place after a specified number of minutes.
Must be used in conjunction with the delay parameter.
delay
An integer between zero and 120, representing seconds before the
initialization. Zero specifies an immediate reboot.
Factory
Reloads the factory settings. All configurations made with the Define and Save
commands will be cleared and will have to be reconfigured.
Noboot
Forces the SCS to remain in the Boot Configuration Program (BCP) instead of
booting.
Reload
On Flash ROM equipped units, re-downloads the operational code and
reprograms the Flash ROM.
Local>> INITIALIZE DELAY 2
Local>> INITIALIZE RELOAD FACTORY DELAY 12
Local>> INITIALIZE FACTORY
Local>> INITIALIZE CANCEL
Rebooting, page 2-5; Reloading Operational Software, page 2-6
⎧
ItemNum String Command
⎪
⎨
TITLE TitleString
⎪
⎩
FILE filename
Requires privileged user status.
The Define command only works with the File parameter if the file is saved in
/flash.
⎫
⎪
⎬
⎪
⎭
12-112
Server Commands