Clear/Purge Snmp; Set/Define Authentication - Lantronix SCS Reference Manual

Command Reference

12.10.4 Clear/Purge SNMP

⎧ ⎫
⎧
CLEAR
⎨ ⎬
SNMP
⎨
⎩ ⎭
PURGE ⎩
Removes entries from the SNMP security table.
Restrictions
Parameters
Examples
See Also

12.10.5 Set/Define Authentication

⎧ ⎫
SET
⎨ ⎬
AUTHENTICATION
⎩ ⎭
DEFINE
Configures the authentication system. Logins on ports with authentication enabled will be prompted for a
username and password pair, which will be checked sequentially against up to six databases: a Kerberos
database, the SCS local database (NVR), a RADIUS server, a SecurID server, or a UNIX password file
(TFTP).
To configure one or more of the six databases, refer to the appropriate command in this section.
Precedence settings should be configured carefully. If a database is configured
Note:
for a precedence slot that has already been filled by another database, it will take
over the precedence setting and return all of the previous database's settings to
their factory defaults.
Restrictions
See Also
⎫
ALL
⎬
⎭
CommunityName
Requires privileged user status.
All
Removes all SNMP table entries.
CommunityName
Enter the name of the SNMP community to be removed.
Local>> CLEAR SNMP "nycomm"
Set/Define SNMP, page 12-177; Set/Define Filter IP, page 12-169; Show/
Monitor/List SNMP, page 12-179; ,
⎧
KERBEROS options
⎪
{
⎪
LOCAL options
⎪
{
RADIUS options
⎪
⎨
SECURID options
⎪
{
⎪
TFTP options
⎪
{
UNIQUE options
⎪
⎩ {
USER options
Requires privileged user status.
Define Site Authentication, page 12-132; Chapter 11, Security
⎫
{ }
⎪
}
⎪
⎪
}
⎪
⎬
{ }
⎪
}
⎪
⎪
}
⎪
} ⎭
12-153
Security Commands