Lantronix SCS Reference Manual page 359

Command Reference Security Commands
None
Clears the current server address.
Precedence
Sets the precedence in which this database or server is checked. The
precedence number must be specified using the prec_num parameter.
prec_num
A precedence number between 1 and 6.
Principle
A label that identifies the authentication service that the SCS requests from the
Kerberos server. Must be used in conjunction with the string parameter.
Instance
A label that is used to distinguish among variations of the principle. Must be
used in conjunction with the string parameter.
string
A case-sensitive string of up to 40 alphanumeric characters. To preserve case,
enclose the string in quotes.
Authenticator
Specifies the password for the principle/instance pair. Must be used in
conjunction with the password parameter.
password
A case-sensitive password of up to 40 alphanumeric or 8 hexadecimal
characters. To preserve case, alphanumeric passwords must be enclosed in
quotes.
Encryption
Specifies that either the Andrew File System (AFS) or MIT Encryption
algorithm will be used to create the Kerberos keys. The SCS encryption
method should match the Kerberos server encryption method.
MIT
Enables use of the MIT encryption algorithm.
AFS
Enables use of the Andrew File System encryption algorithm.
Port
Specifies the UDP/IP Port number used to communicate with the Kerberos
server. The number applies to both the primary and secondary servers. Must be
used in conjunction with the PortNum parameter.
PortNum
An integer between 1 and 65535.
Timeout
Specifies the timeout period for a response from the Kerberos server. Must be
used in conjunction with the seconds parameter.
seconds
An integer between 1 and 255, inclusive.
12-155