Set/Define Ip Subnet; Set/Define Ip Tcp Keepalive - Lantronix SCS Reference Manual

Command Reference

12.5.28 Set/Define IP Subnet

⎧ ⎫
SET
⎨ ⎬
PROTOCOLS IP SUBNET MASK address
⎩ ⎭
DEFINE
Specifies a subnet mask as an IP address. The mask must be specified using the address parameter.
Restrictions
Parameters
Examples
See Also

12.5.29 Set/Define IP TCP Keepalive

⎧ ⎫
SET
⎨ ⎬
PROTOCOLS IP TCPKEEPALIVE
⎩ ⎭
DEFINE
Enables or disables TCP keepalive packets. By default, TCP keepalive packets are enabled and are
transmitted every minute.
Restrictions
Parameters
Defaults
See Also
Requires privileged user status.
Mask
Specifies a subnet mask. Must be used in conjunction with the address
parameter. If a subnet mask isn't specified, a default subnet mask will be
inferred from the server's current IP address.
address
An IP address in standard numeric format (for example, 255.255.192.0).
Local>> SET PROTOCOL IP SUBNET MASK 255.255.255.0
IP Addresses, page 6-1
Requires privileged user status.
Enabled
Transmits keepalives.
Disabled
Does not transmit keepalives.
Enabled
Show/Monitor/List IP, page 12-35
12-45
⎧ ⎫
ENABLED
⎨ ⎬
⎩ ⎭
DISABLED
IP/Network Commands