Set/Define Protocol Ftp; Set/Define Protocol Http; Set/Define Protocol Ssh Mode - Lantronix SCS Reference Manual

Command Reference

12.8.4 Set/Define Protocol FTP

⎧ ⎫
SET
⎨ ⎬
PROTOCOL FTP
⎩ ⎭
DEFINE
Enables or disables the on-board FTP server. Disabling the FTP server results in greater security.
Defaults
See Also

12.8.5 Set/Define Protocol HTTP

⎧ ⎫
SET
⎨ ⎬
PROTOCOL HTTP
⎩ ⎭
DEFINE
Controls whether the user can log in using the web browser interface.
Defaults
Parameters
See Also

12.8.6 Set/Define Protocol SSH Mode

⎧ ⎫
SET
⎨ ⎬
PROTOCOL SSH MODE
⎩ ⎭
DEFINE
Allows the user to specify they types of SSH connections allowed from the command prompt of the SCS.
Restrictions
⎧ ⎫
ENABLED
⎨ ⎬
⎩ ⎭
DISABLED
Enabled
Disabling the FTP and HTTP Servers, page 11-23
⎧ ⎫
ENABLED
⎪ ⎪
⎨ ⎬
DISABLED
⎪ ⎪
⎩ ⎭
SECURE
Enabled
Enabled
Normal (non-privileged) users are allowed to view the web pages but must
become the superuser to make any configuration changes.
Disabled
No access is allowed to the web pages.
Secure
Superuser access is required to view any web pages.
Disabling the FTP and HTTP Servers, page 11-23
V1ONLY
V1PREFER
V2ONLY
V2PREFER
Requires privileged user status.
12-114
Server Commands