Set/Define Ports Termtype; Set/Define Ports Type - Lantronix SCS Reference Manual

Command Reference
Parameters
In the absence of a PortList or the All parameter, the configuration will affect the
Note:
current port only.
Defaults
See Also

12.6.51 Set/Define Ports TermType

⎧ ⎫
SET PORTS PortList
⎨ ⎬
⎩ ⎭
DEFINE
Specifies a terminal type for the port. The terminal type is reported to the destination node in Telnet and
Rlogin sessions. Example terminal types might be VT100 or IBM1000.
Restrictions
Parameters
In the absence of a PortList or the All parameter, the configuration will affect the
Note:
current port only.
Defaults
See Also

12.6.52 Set/Define Ports Type

⎧ ⎫
SET PORTS PortList
⎨ ⎬
⎩ ⎭
DEFINE
PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
Enabled
Padding Return Characters, page 8-14
⎧
TermString
⎨
TERMTYPE
⎩
ALL NONE
Requires privileged user status if you want to use this command on ports other
than your own.
PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
TermString
Enter a string of up to 8 characters in length.
None
Clears the field. There is no terminal type configured by default.
None defined
Specifying a Terminal Type, page 8-14
⎧
ANSI
⎪
⎨
TYPE
SOFTCOPY
⎪
ALL
⎩
HARDCOPY
12-90
⎫
⎬
⎭
⎫
⎪
⎬
⎪
⎭
Port Commands