Set/Define Ip Domain; Set/Define Ip Ethernet; Set/Define Ip Host Limit - Lantronix SCS Reference Manual

Command Reference

12.5.16 Set/Define IP Domain

⎧ ⎫
SET
⎨ ⎬
PROTOCOLS IP DOMAIN
⎩ ⎭
DEFINE
Sets the default domain suffix. This suffix is appended to host names during IP name resolution.
Restrictions
Parameters
Defaults
Examples
See Also

12.5.17 Set/Define IP Ethernet

See Set/Define IP All/Ethernet, page 12-35.

12.5.18 Set/Define IP Host Limit

⎧ ⎫
SET
⎨ ⎬
PROTOCOLS IP HOST LIMIT
⎩ ⎭
DEFINE
Sets the maximum number of TCP/IP hosts that the SCS will add to its host table as a result of Rwho and
DNS lookups. Hosts from the preset host table are exempt from this limit.
Restrictions
Parameters
Defaults
See Also
⎧
DomainName
⎨
⎩
NONE
Requires privileged user status.
DomainName
A string of up to 64 characters.
None
Clears an existing domain suffix.
None (no domain defined)
Local>> SET IP DOMAIN your.domain.com
Show/Monitor/List IP, page 12-49; Specifying a Default Domain Name, page
6-7
⎧
⎨
⎩
Requires privileged user status.
num
An integer between 0 and 200.
None
Clears any current host limit.
Limit: 200 hosts
Show/Monitor/List IP, page 12-49; Adding Hosts to the Host Table, page 6-7
12-38
⎫
⎬
⎭
⎫
num
⎬
⎭
NONE
IP/Network Commands