Define Ports Modem Error - Lantronix SCS Reference Manual

Command Reference
Defaults
Examples
See Also

12.4.11 Define Ports Modem Error

DEFINE PORTS PortList
Defines a string to expect on outbound calls when the modem encounters an error.
Restrictions
Parameters
In the absence of a PortList or the All parameter, the configuration will affect the
Note:
current port only.
Defaults
Examples
See Also
DialString
A string of up to 12 characters. Often touch tone dialing is activated with "dt"
and pulse dialing is activated with "dp."
Depends on modem and modem profile.
Local>> DEFINE PORT 2 MODEM DIAL "dt"
Define Ports Modem Commandprefix, page 12-6; Profile Settings, page 9-5
MODEM ERROR string
ALL
Requires privileged user status.
PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
string
A string of up to 12 characters set to "ERROR" by default.
Depends on modem and modem profile.
Local>> DEFINE PORT 2 MODEM ERROR "ERROR"
Profile Settings, page 9-5; Define Ports Modem Errorcorrection, page 12-10
12-9
Modem Commands