Show/Monitor/List Logging; Show/Monitor/List Snmp; Pc Card Commands; Show Pccard - Lantronix SCS Reference Manual

Command Reference

12.10.28 Show/Monitor/List Logging

⎧ ⎫
SHOW
⎪ ⎪
⎨ ⎬
LOGGING MEMORY
MONITOR
⎪ ⎪
⎩ ⎭
LIST
Displays the current or saved event logging configuration.
Restrictions
Parameters
See Also

12.10.29 Show/Monitor/List SNMP

⎧ ⎫
SHOW
⎪ ⎪
⎨ ⎬
SNMP
MONITOR
⎪ ⎪
⎩ ⎭
LIST
Displays the current or saved SNMP security table entries.
Restrictions
See Also

12.10.30 PC Card Commands

12.10.31 Show PCCard

SHOW PCCard
Provides general information about the PC card(s) installed in an SCS200 or SCS400.
You must be the privileged user to use the Monitor command.
Secure users may not use this command.
Memory
Displays the memory log.
Set/Define Logging, page 12-172; Event Logging, page 11-25
Requires privileged user status.
Clear/Purge SNMP, page 12-153; ,
12-179
Security Commands