Define Ports Modem Speaker; Define Ports Modem Statistics - Lantronix SCS Reference Manual

Command Reference

12.4.21 Define Ports Modem Speaker

DEFINE PORTS PortList
ALL
Enables or disables the modem's speaker. The speaker allows the user to hear the modem's dialup and
connect sequences for debugging purposes.
Restrictions
Parameters
In the absence of a PortList or the All parameter, the configuration will affect the
Note:
current port only.
Defaults
Examples
See Also

12.4.22 Define Ports Modem Statistics

DEFINE PORTS PortList
Defines a string to send to the modem to collect connection statistics after each call. This string is preceded
by the Commandprefix string.
Restrictions
Parameters
MODEM SPEAKER
Requires privileged user status.
PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
EnableString
A string of up to 12 characters. Commonly set to "m1/1." When this string is
received by the modem, the modem's speaker will be enabled.
DisableString
A string of up to 12 characters. Commonly set to "m0." When this string is
received by the modem, the modem's speaker will be disabled.
Disabled (no strings defined)
Local>> DEFINE PORT 2 MODEM SPEAKER ENABLED
Local>> DEFINE PORT 2 MODEM SPEAKER "m11" "m0"
Profile Settings, page 9-5
MODEM STATISTICS string
ALL
Requires privileged user status.
PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
⎧
ENABLED
⎪
⎨
DISABLED
⎪
⎩
EnableString DisableString
12-15
Modem Commands
⎫
⎪
⎬
⎪
⎭