Define Ports Modem Init - Lantronix SCS Reference Manual

Command Reference
Parameters
In the absence of a PortList or the All parameter, the configuration will affect the
Note:
current port only.
Defaults
Examples
See Also

12.4.14 Define Ports Modem Init

DEFINE PORTS PortList
Defines an initialization string to send to the modem. The string is preceded by the Commandprefix string.
Restrictions
Parameters
In the absence of a PortList or the All parameter, the configuration will affect the
Note:
current port only.
Defaults
Examples
See Also
PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
string
A string of up to 12 characters. Commonly set to "&v."
Depends on modem and modem profile.
Local>> DEFINE PORT 2 MODEM GETSETUP "&v"
Define Ports Modem Commandprefix, page 12-6; Profile Settings, page 9-5
MODEM INIT string
ALL
Requires privileged user status.
PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
string
A string of up to 64 characters.
Depends on modem and modem profile.
Local>> DEFINE PORT 2 MODEM INIT "&fw1&c1&d3s2=128"
Define Ports Modem Commandprefix, page 12-6; Profile Settings, page 9-5
12-11
Modem Commands