Set/Define Ports Menu; Set/Define Ports Modem Emulation - Lantronix SCS Reference Manual

Command Reference
See Also

12.6.32 Set/Define Ports Menu

⎧ ⎫
SET PORTS PortList
⎨ ⎬
⎩ ⎭
DEFINE
Specifies whether or not the port will be placed in menu mode at login. If it is disabled, the Local> prompt
will appear at login. If it is enabled, a menu screen will be displayed; the Local> prompt is not accessible.
Restrictions
Parameters
In the absence of a PortList or the All parameter, the configuration will affect the
Note:
current port only.
Defaults
See Also

12.6.33 Set/Define Ports Modem Emulation

⎧ ⎫
SET PORTS PortList
⎨ ⎬
⎩ ⎭
DEFINE
Specifies whether or not to enable the SCS to emulate a modem for performing network connections. If it
is disabled, the Local> prompt will appear at login. If it is enabled, the SCS will respond to "AT" commands.
Restrictions
Parameters
In the absence of a PortList or the All parameter, the configuration will affect the
Note:
current port only.
Notification of Character Loss, page 8-13
⎧
ENABLED
⎨
MENU
⎩
ALL DISABLED
Requires privileged user status if you want to use this command on ports other
than your own.
PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
Disabled
Clear/Purge Menu, page 12-111; Set/Define Menu, page 12-112; Show/
Monitor/List Menu, page 12-129; Enabling Menu Mode, page 8-12;
Configuring Menu Mode, page 3-4
MODEM EMULATION
ALL
Requires privileged user status if you want to use this command on ports other
than your own.
PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
12-76
⎫
⎬
⎭
⎧ ⎫
ENABLED
⎨ ⎬
⎩ ⎭
DISABLED
Port Commands