Define Ports Modem Errorcorrection; Define Ports Modem Getsetup - Lantronix SCS Reference Manual

Command Reference

12.4.12 Define Ports Modem Errorcorrection

DEFINE PORTS PortList
ALL
Enables or disables error correction in the modem
Restrictions
Parameters
In the absence of a PortList or the All parameter, the configuration will affect the
Note:
current port only.
The DisableString and the EnableString must be entered together.
Note:
Defaults
Examples
See Also

12.4.13 Define Ports Modem Getsetup

DEFINE PORTS PortList
ALL
Defines a string to send to the modem to cause it to return its setup. This string is preceded by the
Commandprefix string. If the string is set to "", the SCS will not attempt to get the modem's setup. The SCS
will always send the Save string after configuration. Modems that do not return their configuration in a
single screen should do this.
Restrictions
MODEM ERRORCORRECTION
Requires privileged user status.
PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
DisableString
A string of up to 12 characters. When the modem receives this string,
automatic answering will be disabled.
EnableString
A string of up to 12 characters. When this string is received by the modem,
error correction will be enabled.
Disabled (no strings defined)
Local>> DEFINE PORT 2 MODEM ERRORCORRECTION ENABLED
Local>> DEFINE PORT 2 MODEM ERRORCORRECTION "&q5" "q0"
Profile Settings, page 9-5; Define Ports Modem Error, page 12-9
MODEM GETSETUP string
Requires privileged user status.
12-10
⎧
ENABLED
⎪
⎨
DISABLED
⎪
⎩
DisableString EnableString
Modem Commands
⎫
⎪
⎬
⎪
⎭