Lantronix SCS Reference Manual page 368

Command Reference
Parameters
Users who don't have passwords configured for them will always be granted
Note:
access.
Examples
See Also
username
A username of up to 16 characters. The name is converted to all uppercase
unless it is enclosed in quotes.
Password
Configures a password for an authenticated user. The password is converted
to all uppercase unless it is enclosed in quotes.
Command
Runs a command or commands immediately after login. The Altcommand
feature must be enabled for this to work. Commands must be enclosed in
quotes and separated by semicolons. The combined length of a series of
commands cannot exceed 100 characters.
Expired
Forces a user to select a new password upon next login.
Alter
Enables or disables a user's ability to change his password. The password can
be changed with the Set/Define Password command.
Altcommand
Enables the use of the command specified with the command parameter.
None
Removes port list from specified user.
Ports Target
Rejects user connection attempt from the network or "connect local" to a port
not on the user's port target list.
Ports Serial
Rejects user connection attempt from the serial (character or PPP) not on the
user's serial port list.
Ports Factory
Resets current port restrictions back to the default.
Portlist/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
Local>> SET AUTHENTICATION USER "fred" COMMAND "TELNET athena;LOGOUT"
Define Site Authentication, page 12-132; Set/Define Password, page 12-176;
Local (NVR) Database, page 11-9; Port User Restrictions, page 11-8
12-164
Security Commands