Logout Port; Purge Port - Lantronix SCS Reference Manual

Command Reference

12.6.3 Logout Port

LOGOUT PORTPortlist
Logs out a port. Active sessions are disconnected, and all site circuits are closed.
Restrictions
Parameters
If the PortList parameter isn't specified, the current port will be logged out.
Note:
Examples
See Also

12.6.4 Purge Port

⎧
PortList
PURGE PORT
⎨
⎩
ALL
Resets a port to the factory default PPP or Modem settings, but without affecting any other port settings.
When used without the PPP or Modem parameters, both PPP and Modem settings are purged.
Restrictions
Parameters
See Also
Only privileged users can log out a port or site other than their own.
Port
Logs out the list of ports specified with the PortList parameter.
PortList
Specifies a port or series of ports to be logged out. Multiple ports must be
separated by commas (for lists) or dashes (for ranges).
Local> LOGOUT
Local>> LOGOUT PORT 2,4-6
Automatic Logouts, page 8-11
⎫
PPP
⎬
⎭ MODEM
Requires privileged user status.
PPP
Resets all Link Control Protocol parameters on the specified port.
Modem
Clears the specified port's modem init information.
PortNum
Specifies a particular SCS port.
Show/Monitor/List Ports, page 12-96; Port Commands, page 12-52
12-53
Port Commands