Set/Define Ip Routing; Set/Define Ip Security - Lantronix SCS Reference Manual

Command Reference
Defaults
Examples
See Also

12.5.26 Set/Define IP Routing

⎧ ⎫
SET
⎨ ⎬
PROTOCOLS IP ROUTING
⎩ ⎭
DEFINE
Configures the routing of IP packets. If routing is disabled, any packets requiring routing on the SCS will
be rejected. The router will still learn routes via RIP (if enabled) for its own use.
Restrictions
Defaults
See Also

12.5.27 Set/Define IP Security

⎧ ⎫
SET
⎨ ⎬
PROTOCOLS IP SECURITY ADDRESS address
⎩ ⎭
DEFINE
Adds or changes entries in the IP security table.
Restrictions
num
An integer from 1 through 16 representing the metric for this route.
Metric: 16 (unreachable)
Local>> SET IP ROUTE 198.8.8.0 NEXT 192.0.1.9
Clear/Purge IP Route, page 12-19; Show/Monitor/List IP Route, page 12-49;
IP Routing, page 6-19
⎧
ENABLED
⎨
⎩
DISABLED
Requires privileged user status.
Enabled
IP Routing, page 6-19
Requires privileged user status.
12-43
⎫
⎬
⎭
⎧
⎪
⎧
⎪ BOTH
⎪
⎪
⎨
INCOMING
⎪
⎪
⎪
⎩
OUTGOING
⎨
⎪
PORTS PortList
⎪
⎪
⎪
PRINTER
⎪
⎩
IP/Network Commands
⎫
⎪
⎫
⎪
⎪ ⎧ ⎫
ENABLED
⎪
⎬ ⎨ ⎬
⎪
⎪ ⎩ ⎭
DISABLED
⎪
⎭
⎬
⎪
⎪
⎪
⎧ ⎫
ENABLED
⎪
⎨ ⎬
⎪
⎩ ⎭
DISABLED
⎭