Show/Monitor Queue - Lantronix SCS Reference Manual

Command Reference
No more than one service per port can be defined at any time; if more than one
Note:
service is defined, the Save Service command may fail.
Examples
See Also

12.11.14 Show/Monitor Queue

⎧ ⎫
SHOW
⎨ ⎬
QUEUE
⎩ ⎭
MONITOR
Show Queue will display the entries in a connect queue, if it exists. Particular sets of queues or entries can
be selected with the Port, Node, or Service parameters. All can also be specified to show all entries.
Restrictions
Parameters
PortList
A port number or list of ports. Port numbers should be separated with
commands (for lists) or dashes (for ranges).
All
Saves the settings for all ports or services to the permanent database.
Server
Save all the server characteristics to the permanent database.
Service
Save the current characteristics of a local service to the permanent database.
name
A service name.
SNMP
Saves all parameters associated with SNMP.
Logging
Saves the current logging configuration to the permanent database.
Menu
Saves all menu items setup using the Set Menu command (discussed on page
12-112) to the permanent database.
Local>> SAVE PORT 2
Local>> SAVE SERVICE NTX
Command Types, page 2-3
PORT PortNum
NODE nodename
ALL
SERVICE ServiceName
You must be the privileged user to use the Monitor command.
Port
Displays information for all queue entries that can be served by the specified
port. Must be used in conjunction with the PortNum parameter.
PortNum
Specifies a particular SCS port.
12-190
Navigation/Help Commands