Privileged Password - Lantronix SCS Reference Manual

Getting Started

2.3.2 Privileged Password

Changing any server, site, or port setting requires privileged user status. Use the default username, root, and
the default privileged password, system.
When you click on a link in the left navigation column of the SCS web browser interface, you are prompted
for the privileged username and password. Once you enter the password, you can access all of the
configuration pages.
If you are at the command line, become the privileged user by entering the following command.
Local> SET PRIVILEGED
Password> system (not echoed)
Local>>
The complete command syntax for Set Privileged is available on page 12-92.
Note:
Figure 2-9: Root-Level Authentication
Figure 2-10: Set Privileged Command
2-8
System Passwords