Set/Define Service Formfeed; Set/Define Service Identification - Lantronix SCS Reference Manual

Command Reference
Defaults
See Also

12.7.7 Set/Define Service Formfeed

⎧ ⎫
SET
⎨ ⎬
SERVICE ServiceName FORMFEED
⎩ ⎭
DEFINE
If enabled (the default), the SCS will append a formfeed at the end of any LPR print jobs.
Restrictions
Defaults
See Also

12.7.8 Set/Define Service Identification

⎧ ⎫
SET
⎨ ⎬
SERVICE ServiceName IDENTIFICATION
⎩ ⎭
DEFINE
Provides an information string for the specified service.
Restrictions
Parameters
None
Clears any previously-configured string.
No string configured
Clear/Purge Service, page 12-101
⎧
⎨
⎩
Requires privileged user status.
Enabled
Clear/Purge Service, page 12-101
Requires privileged user status.
string
Enter an information string of up to 40 characters.
12-104
⎫
ENABLED
⎬
⎭
DISABLED
⎧ ⎫
string
⎨ ⎬
⎩ ⎭
NONE
Service Commands