Clear/Purge Ip Trusted; Connect - Lantronix SCS Reference Manual

Command Reference

12.5.6 Clear/Purge IP Trusted

⎧ ⎫
CLEAR
⎨ ⎬
IPTRUSTED
⎩ ⎭
PURGE
Removes all entries from the trusted router table.
Restrictions
Parameters
Examples
See Also

12.5.7 Connect

⎧
⎪
⎪
SSH host :port :envstring username
⎪
⎪
⎪
⎪
⎪
⎨
CONNECT
⎪
⎪
⎪ RLOGIN host :port :envstring username
⎪
⎪
⎪
⎪
⎩
Establishes a connection with a TCP/IP host. If no hostname is specified, a connection to any preferred host
is attempted.
The keyword "Connect" is not needed for Telnet or Rlogin connections, but must
Note:
be included in the command for TCP or Local connections.
Outgoing SSH connections can specify a host, optional port, optional username, and optional command to
be executed on the remote machine. After the command is executed, the SSH connection will end.
A colon and session environment string can be added to the connect request (see Setting Session
Characteristics on page 8-7). A colon and a port number can be added to the hostname for TCP/Telnet/
Rlogin sessions; in this case, the specified port number will be used for the connection. There should be no
spaces between the hostname, colon, and port number or environment string.
⎧ ⎫
address
⎨ ⎬
⎩ ⎭
ALL
You must be the privileged user to use this command.
address
An IP address in standard numeric format (for example, 193.53.2.2).
All
Clears or purges the entire security table.
Local>> PURGE IP TRUSTED 192.0.1.1
Local>> PURGE IP TRUSTED ALL
Set/Define IP Trusted, page 12-47; Show/Monitor/List IP Trusted, page 12-49;
Routing Tables, page 6-19
⎧ ⎫
TELNET
⎨ ⎬
host :port :envstring
⎩ ⎭
TCP
LOCAL target :envstring
⎫
⎪
⎪
⎪
command
⎪
⎪
⎪
⎪
⎬
⎪
⎪
⎪
⎪
⎪
⎪
⎪
⎭
12-20
IP/Network Commands