Define Site Dial On Hangup; Define Site Filter - Lantronix SCS Reference Manual

Command Reference

12.9.5 Define Site Dial on Hangup

DEFINE SITE SiteName DIALONHANGUP
A call and hangup on any of the ports associated with this site causes the site to form an outbound call.
Restrictions
Parameters

12.9.6 Define Site Filter

DEFINE SITE SiteName FILTER
Configures packet filters for the site. If a particular packet filter is not configured, all packets are considered
matches of that filter type and are accepted. For example, if no incoming packet filter is configured, all
packets will be accepted as incoming packets and will be allowed in.
Restrictions
Parameters
ENABLED
DISABLED
Requires privileged user status.
SiteName
Enter a site name of up to 12 characters.
⎧ ⎫
⎪ ⎪
IDLE
⎪ ⎪ ⎧
filtername
INCOMING
⎨ ⎬ ⎨
⎪ ⎪ ⎩
OUTGOING
⎪ ⎪
⎩ ⎭
STARTUP
Requires privileged user status.
SiteName
Enter a site name of up to 12 characters.
Idle
Configures the packet filter that resets the idle timer. Packets that pass this
filter will reset the timer, keeping the site from timing out and disconnecting.
Must be used in conjunction with the filtername parameter.
Incoming
Configures the packet filter for packets that come into the SCS from the remote
site. Packets that do not pass this filter will be dropped. Must be used in
conjunction with the filtername parameter.
Outgoing
Configures the packet filter for packets going from the SCS to the remote site.
Packets that do not pass this filter will be dropped. Must be used in conjunction
with the filtername parameter.
12-138
⎫
⎬
⎭
NONE
Site Commands