Define Site Idle - Lantronix SCS Reference Manual

Command Reference
Examples
See Also

12.9.7 Define Site Idle

DEFINE SITE SiteName IDLE
Sets the maximum time, in seconds, that the specified site may be idle before the link is shut down ("timed
out").
The SCS must be idle for at least 10 seconds before the link can be shut down.
Note:
Restrictions
Parameters
Defaults
Examples
See Also
Startup
Configures the packet filter for regulating connections. Packets that pass this
filter can cause the site to initiate a connection. Packets that do not pass this
filter will be dropped if a link is not already in place, but will continue to their
destination if a link has already been established. Must be used in conjunction
with the filtername parameter.
filtername
Sets the filter to be used for a specific type of packet filtering. Filter names
must be 3 characters or fewer.
None
Clears any previously-set filter for that site.
Local>> DEFINE SITE irvine FILTER IDLE a3f
Local>> DEFINE SITE irvine FILTER IDLE m00
Local>> DEFINE SITE irvine FILTER IDLE gb
Set/Define Filter, page 12-166; Show/Monitor/List Filter, page 12-178; Filter
Lists, page 5-2
sec onds
Requires privileged user status.
SiteName
Enter a site name of up to 12 characters.
seconds
The maximum length of time (specified by an integer between 10 and 65,000)
that the site can remain idle before the link disconnects. A time setting of 0 will
disable timeouts.
Idle time: 600 seconds.
Local>> DEFINE SITE irvine IDLE 600
Define Site Filter Idle, page 12-138; Set/Define Server Inactivity, page 12-118;
Reducing Cost, page 5-10
12-139
Site Commands