Lantronix SCS Reference Manual page 284

Command Reference
Defaults
Examples
See Also
Rlogin
Specifies that the service is a default Rlogin connection. Must be used in
conjunction with the hostname parameter.
SSH
Specifies that the service is a default SSH connection. Must be used in
conjunction with the hostname parameter.
TCP
Specifies that the service is a default TCP connection. If there is no local
nameserver defined, the host must be specified with a numeric hostname. Must
be used in conjunction with the hostname parameter.
hostname
TCP host name of 40 characters or less, or an IP address in standard numeric
format (for example, 192.0.1.3).
envstring
Sets up the connection environment before the session is started. The string is
constructed with a sequence of key letters, some of which are prefaced by
either the "+" or "-." For the available key letters and usage instructions, see
Appendix A, Environment Strings. If no environment string is specified with
the TCP parameter, the connection will default to a Telnet connection.
None
Local>> SET PORT 2 PREFERRED TELNET 192.0.1.3
Local>> SET PORT 3 PREFERRED todd
Connect, page 12-20; Rlogin, page 12-22; Set/Define Ports Autoconnect, page
12-59; Define Ports Dedicated, page 12-68; Setting Session Characteristics,
page 8-7
12-80
Port Commands