Lantronix SCS Reference Manual page 233

Command Reference
Defaults
Examples
See Also
12.5.12.8 Set/Define 80211 Network Mode
⎧ ⎫
SET
⎨ ⎬
80211 NETWORKMODE
⎩ ⎭
DEFINE
Denotes whether the SCS operates in a peer-to-peer (AdHoc) or managed (Infrastructure) network
environment.
Any configuration changes you make with the above commands will not take place until you reboot the SCS
or issue the Set 80211 Reset command.
Restrictions
Errors
Parameters
Defaults
Examples
See Also
SCS
Instructs the SCS to use its own internal MAC address.
SCS
Local>> DEFINE 80211 MACADDRESS CARD
Local>> SET 80211 RESET
Show 80211, page 12-48; 802.11 Configuration, page 2-11
⎧
ADHOC
⎨
⎩
INFRASTRUCTURE
Requires privileged user status.
Only applies to the SCS200.
If you enter a command that is not applicable to the 802.11 card currently in
use, you will receive an Error message.
AdHoc
Specifies that the SCS is communicating with other wireless devices in a peer-
to-peer capacity.
Infrastructure
Specifies that the SCS is communicating with an Access Point (AP).
Infrastructure
Local>> DEFINE 80211 NETWORKMODE ADHOC
Local>> SET 80211 RESET
Show 80211, page 12-48; 802.11 Configuration, page 2-11
12-29
IP/Network Commands
⎫
⎬
⎭