Lantronix SCS Reference Manual page 378

Command Reference
Setting the IP logging level to 2 or greater results in a syslog that prints the
Note:
source/destination IP address, protocol, and TCP/UDP source/destination
ports.
Dialback
Logs events associated with dialback functionality. Must be used with the num
parameter or the None parameter.
Level Information
1 Dialback Problems
2 Unauthorized Users
3 Dialback Failures
4 Dialback Successes
5 Dialback Attempts
6 Modem Chat
IP
Traces the activities of the IP router. Must be used with the num parameter or
the None parameter.
Level Information
1 Errors
2 Packets triggering remote connections
3 Routing table/interface changes
4 Incoming/outgoing RIP packets
5 Resulting routing table (verbose)
6 Contents of all RIP packets (verbose)
7 Routed packets (verbose)
Modem
Logs modem activity, including modem jobs (incoming and outgoing). Must
be used with the num parameter or the None parameter.
Level Information
1 Problems
2 Call Statistics Dump From Modem
3 Setup
12-174
Security Commands