Set/Define Server Altprompt; Set/Define Server Bootp - Lantronix SCS Reference Manual

Command Reference
Parameters
Defaults
See Also

12.8.7 Set/Define Server Altprompt

⎧ ⎫
SET
⎨ ⎬
SERVER ALTPROMPT
⎩ ⎭
DEFINE
Enables or disables the alternate UNIX-like prompts at login time. When enabled, the "Username>" prompt
is changed to "login:" and the "Password>" prompt is changed to "Password:."
Defaults
See Also

12.8.8 Set/Define Server BOOTP

⎧ ⎫
SET
⎨ ⎬
SERVER BOOTP
⎩ ⎭
DEFINE
Enables or disables querying for a BOOTP host at system boot time.
Restrictions
Defaults
See Also
V1ONLY
The SCS offers only SSHv1 incoming and outgoing connections.
V1PREFER
The SCS offers both v1 and v2 incoming (host to SCS) connections, and the
client chooses. If both versions are available, the SCS chooses SSHv1 for (SCS
to Host) outgoing connections.
V2ONLY
The SCS offers only SSHv2 incoming and outgoing connections.
V2PREFER
The SCS offers both v1 and v2 incoming (host to SCS) connections, and the
client chooses. If both versions are available, the SCS chooses SSHv2 for
outgoing (SCS to Host) connections.
V2PREFER
Supported SSH Connections, page 6-11
⎧ ⎫
ENABLED
⎨ ⎬
⎩ ⎭
DISABLED
Disabled
Set/Define Server Prompt, page 12-123
⎧ ⎫
ENABLED
⎨ ⎬
⎩ ⎭
DISABLED
Requires privileged user status.
Enabled
Your SCS User Guide
12-115
Server Commands