Define Ports Modem Nocarrier; Define Ports Modem Nodialtone - Lantronix SCS Reference Manual

Command Reference

12.4.15 Define Ports Modem Nocarrier

DEFINE PORTS PortList
ALL
Defines a string to expect on outbound calls when the modem can dial but doesn't connect.
Restrictions
Parameters
In the absence of a PortList or the All parameter, the configuration will affect the
Note:
current port only.
Defaults
Examples
See Also

12.4.16 Define Ports Modem Nodialtone

DEFINE PORTS PortList
Defines a string to expect on outbound calls when the modem can't detect a dial tone.
Restrictions
Parameters
In the absence of a PortList or the All parameter, the configuration will affect the
Note:
current port only.
Defaults
Examples
See Also
MODEM NOCARRIER string
Requires privileged user status.
PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
string
A string of up to 12 characters. Commonly set to "NO CARRIER"
Depends on modem and modem profile.
Local>> DEFINE PORT 2 MODEM NOCARRIER "NO CARRIER
Profile Settings, page 9-5
MODEM NODIALTONE string
ALL
Requires privileged user status.
PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
string
A string of up to 12 characters. Commonly set to "NO DIAL."
Depends on modem and modem profile.
Local>> DEFINE PORT 2 MODEM NODIAL "NO DIAL"
Profile Settings, page 9-5
12-12
Modem Commands
"