Lantronix SCS Reference Manual page 47

Console Server Features
If
The user forms a Telnet or SSH connection
to the SCS
and
Issues a Connect Local command to
connect to port 7
(Note that port 7's break settings are not
applicable.)
and
receives a default AltBreak character from
port 0
The user forms a Telnet connection from a
host to port 7 on the SCS using socket 2007
and
the AltBreak character has been defined on
port 7
and
the AltBreak character is detected in the
data stream from the host
(Note that the 20xx range of sockets
performs Telnet IAC interpretation.)
The user forms a Telnet connection from a
host to port 7 on the SCS using socket 2007
and
the AltBreak character has been defined on
port 7
and
the a break condition is detected on the
serial port
(Note that the 20xx range of sockets
performs Telnet IAC interpretation.)
Table 3-1: Examples of Alternate Break Sequences
And
The template port
(port 0) has Break
= Local
The template port
has Break =
Remote
Port 7 has Break =
Remote
Port 7 has Break=
Local
Port 7 has Break =
Remote
Port 7 has Break =
Local
Then
The AltBreak sequence returns
the user to a local (SCS)
command prompt.
A break condition is generated on
port 7.
A serial break condition is
generated on the port.
Nothing happens.
A Telnet Break IAC is sent on the
network connection.
Nothing happens.
3-12
Managing the Attached Devices