Show Ip Counters; Show/Monitor/List Hosts - Lantronix SCS Reference Manual

Command Reference

12.5.33 Show IP Counters

SHOW IP COUNTERS
Displays current TCP/IP traffic counters.

12.5.34 Show/Monitor/List Hosts

⎧ ⎫
SHOW
⎪ ⎪
⎨ ⎬
TELNET HOSTS
MONITOR
⎪ ⎪
⎩ ⎭
LIST
Displays either the currently available TCP/IP (Telnet/Rlogin) hosts (Show) or the ones that have been
Defined locally in the host table (List). Hosts will be shown with the method of discovery (rwho,
connection, host table, etc.) and will also be marked if they are the current nameserver and/or gateway.
Specifying a particular host name will show only that host's information. Wildcards for the hostnames are
allowed. The All option is the default, and it displays all known TCP/IP hosts.
Restrictions
Parameters
Examples
See Also
hostname
ALL
LOCAL
You must be the privileged user to use the Monitor command.
hostname
Specifies a particular TCP/IP host.
All
Displays all the TCP/IP nodes that this server currently knows about. These
include hosts from the local host table, as well as hosts seen by Rwho
broadcasts and those resolved after a Connect/Telnet request.
Local
Displays local TCP/IP nodes.
Local> SHOW HOSTS ALL
Set/Define Hosts, page 12-34; Adding Hosts to the Host Table, page 6-7
12-48
IP/Network Commands