Define Site Bandwidth - Lantronix SCS Reference Manual

Command Reference

12.9.3 Define Site Bandwidth

DEFINE SITE SiteName BANDWIDTH
Sets the initial or maximum amount of bandwidth that should be used when connecting to the specified site.
Also controls how the SCS calculates the bandwidth needed, and how often it is checked to see if it is within
the desired range.
This command is only useful when Multilink (bandwidth on demand) is enabled. See Define Ports PPP
Multilink, page 12-81, and Bandwidth On Demand on page 5-4 for more information.
Restrictions
Parameters
⎧
⎪
ADD
⎪
⎪
REMOVE
⎪
⎪
⎪
⎨
INITIAL
⎪
⎪
MAXIMUM
⎪
⎪
PERIOD
⎪
⎪
HOLDDOWN
⎩
Requires privileged user status.
SiteName
A site name of up to 12 characters.
Add
Attempts to add bandwidth whenever usage reaches a specified percentage.
Must be used in conjunction with the utilization parameter.
Remove
Removes bandwidth when usage falls below a certain percentage. Must be
used in conjunction with the BytesPerSecond parameter.
utilization
The percentage of usage above which the SCS will attempt to add bandwidth
and below which the SCS will remove bandwidth.
Default
Returns the bandwidth to the SCS's default setting.
Initial
Sets the initial amount of bandwidth. Must be used in conjunction with the
BytesPerSecond parameter.
Maximum
Sets the maximum amount of bandwidth. Must be used in conjunction with the
BytesPerSecond parameter.
12-134
⎫
⎪
⎪
utilization
⎪
⎪
⎪
DEFAULT
⎪
⎬
⎪
BytesPerSecond
⎪
⎪
⎪
⎪
seconds
⎪
⎭
Site Commands