Set/Define Ip Ipaddress; Set/Define Ip Loadhost; Set/Define Ip Nameserver - Lantronix SCS Reference Manual

Command Reference

12.5.19 Set/Define IP IPaddress

⎧ ⎫
SET
⎨ ⎬
PROTOCOLS IP IPADDRESS address
⎩ ⎭
DEFINE
Specifies the server's IP address for TCP/IP connections.
Restrictions
Errors
Parameters
See Also

12.5.20 Set/Define IP Loadhost

⎧ ⎫
SET
⎨ ⎬
PROTOCOLS IP SECONDARY LOADHOST address
⎩ ⎭
DEFINE
Specifies the IP address of the host used for TFTP loading.
Restrictions
Parameters
See Also

12.5.21 Set/Define IP Nameserver

⎧ ⎫
SET
⎨ ⎬
PROTOCOLS IP SECONDARY NAMESERVER address
⎩ ⎭
DEFINE
Specifies the IP address of the local nameserving host for use on IP connections and NetBIOS connections
that use IP. The host's address must be specified using the address parameter, described below.
Restrictions
Parameters
Requires privileged user status.
An error is returned if there are active connections to the SCS. An error is
returned if the address is in use by another node.
address
An IP address in standard numeric format (for example, 193.0.1.50).
Show/Monitor/List IP, page 12-49; IP Addresses, page 6-1
Requires privileged user status.
address
An IP address in standard numeric format (for example, 193.0.1.5).
Set/Define Server Loadhost, page 12-120
Requires privileged user status.
address
An IP address in standard numeric format (for example, 193.0.1.5).
12-39
IP/Network Commands