Define Site Mtu - Lantronix SCS Reference Manual

Command Reference
Defaults
Examples
See Also

12.9.9 Define Site MTU

DEFINE SITE SiteName MTU MaxSize
Configures the maximum sized packet that the remote site may send to the SCS. Packets larger than this will
be fragmented by the remote site.
Restrictions
Parameters
The SCS will negotiate MTU with the remote site, so the actual MTU may be
Note:
lower than what is configured.
Update
Configures the time, in seconds, between sending a RIP packet. Must be used
in conjunction with the time parameter.
time
An integer between 10 and 255 representing the number of seconds between
updates.
Slots
Configures the number of header compression slots. Must be used in
conjunction with the SlotNum parameter.
SlotNum
An integer between 1 and 254.
IP, Compress, and RIP: Enabled
Address, Netmask, and RemoteAddress: None
Default: Disabled
RIP Metric: 1
RIP Updates: every 30 seconds
Header compression slots: 16
Local>> DEFINE SITE irvine IP SLOTS 16
Local>> DEFINE SITE irvine IP RIP UPDATE 30
Local>> DEFINE SITE irvine IP UNNUMBERED
Local>> DEFINE SITE irvine IP RIP METRIC 4
Local>> DEFINE SITE irvine IP COMPRESS ENABLED
Local>> DEFINE SITE irvine IP FORWARD ENABLED
Set/Define Logging Sites, page 12-172; Show/Monitor/List Sites, page 12-
149; Configuring RIP for Sites, page 4-10; Chapter 7,Character Mode Sites
Requires privileged user status.
SiteName
A site name of up to 12 characters.
MaxSize
Between 32 and 1522 bytes, inclusive.
Default
1522 bytes.
12-142
Site Commands