Set/Define Ports Stop; Set/Define Ports Telnet Pad - Lantronix SCS Reference Manual

Command Reference
Examples
See Also

12.6.49 Set/Define Ports Stop

⎧ ⎫
SET PORTS PortList
⎨ ⎬
⎩ ⎭
DEFINE
Specifies the stop bit count for the port. The default is to use one stop bit.
Restrictions
Errors
Parameters
In the absence of a PortList or the All parameter, the configuration will affect the
Note:
current port only.
Defaults

12.6.50 Set/Define Ports Telnet Pad

⎧ ⎫
SET PORTS PortList
⎨ ⎬
⎩ ⎭
DEFINE
If Telnet Pad is enabled (the default), the server automatically pads carriage returns with null characters for
Telnet sessions.
Restrictions
Local>> SET PORTS SPEED 2400
Set/Define Ports Autobaud, page 12-58; Modem Speeds, page 9-2
⎧ ⎫
1
⎨ ⎬
STOP
⎩ ⎭
ALL 2
Requires privileged user status if you want to use this command on ports other
than your own. Secure users may not use this command.
An error is displayed if an invalid stop bit number is entered.
PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
1 stop bit
⎧
ENABLED
⎨
TELNET PAD
⎩
ALL DISABLED
Requires privileged user status if you want to use this command on ports other
than your own.
⎫
⎬
⎭
12-89
Port Commands