Set/Define Authentication Strictfail - Lantronix SCS Reference Manual

Command Reference
Defaults
Examples
See Also

12.10.10 Set/Define Authentication Strictfail

⎧ ⎫
SET
⎨ ⎬
AUTHENTICATION STRICTFAIL
⎩ ⎭
DEFINE
Strict fail mode aborts the authentication process if any method returns an error of "invalid error" or "invalid
password."
Restrictions
Defaults
See Also
PortNum
An integer between 1 and 65535.
Timeout
Specifies the timeout period for a response from the SecurID server. Must be
used in conjunction with the seconds parameter.
seconds
An integer between 1 and 255, inclusive.
Encryption: DES
Maxtries: 5
UDP/IP port: 5500
Timeout: 3 seconds
Local>> DEFINE AUTHENTICATION SECURID PRIMARY 192.0.1.55
Local>> DEFINE AUTHENTICATION SECURID TIMEOUT 10 MAXTRIES 4
Local>> DEFINE AUTHENTICATION SECURID ACCOUNTING ENABLED
Define Site Authentication, page 12-132; SecurID, page 11-17
⎧
⎪
⎨
⎪
⎩
Requires privileged user status.
Disabled
Show/Monitor/List Authentication, page 12-177; Database Configuration,
page 11-9, Disabling HTTP and FTP, page 6-17
12-161
⎫
⎪
ENABLED
⎬
⎪
DISABLED
⎭
Security Commands