Lantronix SCS Reference Manual page 286

Command Reference Port Commands
ACCM
Enters an asynchronous control map in hexadecimal. Bits turned on represent
ASCII characters that will be escaped in the PPP data stream. See Character
Escaping on page 7-1 for more information.
map
A hexadecimal value between 0x00000000 and 0xffffffff.
XONXOFF
A default map that escapes the XON and XOFF software flow control
characters.
CHAP
Configures the Challenge Handshake Authentication Protocol (CHAP). See
PPP Authentication on page 7-2
PAP
Configures the Password Authentication Protocol (PAP). See PPP
Authentication on page 7-2 for more information.
Both
Enables authentication for both this node and the remote node.
Disabled
Turns off CHAP/PAP authentication.
Local
The SCS will authenticate itself to the SCS.
Remote
The remote node will authenticate itself to the SCS.
Counter
Specifies the number of configuration retries for the Link protocol and all
Network Control protocols.
Configure
Specifies the number of Configure-Requests to send before giving up
negotiation.
Failure
Specifies the number of Configure-Naks to send before giving up negotiation.
Terminate
Specifies the number of Terminate-Requests to send before disconnecting.
num
An integer between 1 and 255.
HeaderCompression
Enables or disables compression of PPP headers. See Header Compression on
page 7-1 for more information.
MagicNumber
Controls PPP magic numbers.
12-82