Snoop Port; Define Email - Lantronix SCS Reference Manual

Command Reference

12.6.8 Snoop Port

SNOOP PORT PortNum
Enables you to watch the data traffic on a local serial port.
Restrictions
Parameters
All data may not display if you are monitoring a high speed serial port on a
Note:
slower speed connection.
See Also

12.6.9 Define Email

DEFINE EMAIL emailsite
Configures email notification in a format known as an emailsite, which contains all of the information
needed when email notification for port buffering is enabled. Emailsites can be named default or portxx,
where xx is the port number. The portxx sites will be used for email notification on that port, e.g. the port12
emailsite will be used for port buffering on port 12.
The default emailsite configurations will be used to fill in any blanks for the port-specific emailsites.
All of the above strings can use dynamic print variables. Available dynamic print variables are shown in the
following table.
IN
OUT
BOTH
Requires privileged user status.
PortNum
Specifies a particular SCS port to watch.
In
Displays only data coming into the serial port from an attached device.
Out
Displays only data going from the SCS serial port to the attached serial device.
Both
Displays both incoming and outgoing data to and from the serial port.
Incoming data is displayed in inverse video.
Show/Monitor/List Ports, page 12-96;
⎧ ⎫
⎪ ⎪
TO address
⎪ ⎪
FROM string
⎪ ⎪
⎨ ⎬
SUBJECT subject
⎪ ⎪
⎪ ⎪
MAILHOST mailhost
⎪ ⎪
REPLYTO address
⎩ ⎭
12-55
Port Commands