Set/Define Ports Password - Lantronix SCS Reference Manual

Command Reference
Parameters
In the absence of a PortList or the All parameter, the configuration will affect the
Note:
current port only.
Defaults
See Also

12.6.36 Set/Define Ports Password

⎧ ⎫
SET PORTS PortList
⎨ ⎬
⎩ ⎭
DEFINE
Controls whether or not the login password is required to log in to an SCS port. The Set/Define Server
Login Password command is used to set the password.
Restrictions
Errors
Parameters
In the absence of a PortList or the All parameter, the configuration will affect the
Note:
current port only.
Defaults
See Also
PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
None (no parity)
Set/Define Ports Autobaud, page 12-58; Set/Define Ports Character Size, page
12-64; Serial Port Configuration, page 8-13
⎧
⎪
⎪
⎪
⎨
PASSWORD
⎪
ALL
⎪
INCOMING
⎪
⎩
Requires privileged user status.
The virtual port (port 0) password must be enabled or disabled with the Define
command.
PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
Incoming
When enabled, users who Telnet or SSH directly to the target serial port are
forced to provide the login password.
Disabled
Set/Define Server Login Password, page 12-121; Login Password, page 8-10
12-78
⎫
ENABLED
⎪
⎪
DISABLED
⎪
⎧ ⎫
⎬
⎪ ⎪
⎪
ENABLED
⎨ ⎬
⎪
⎪ ⎪
⎪
DISABLED
⎩ ⎭
⎭
Port Commands